Advertisement
5.
If you're in the Play mode, click the [Preferences] button and then the [MIDI Preferences]
button. If you're in the Edit mode, click the [Preferences] button.
6.
Use "Device ID" to set the Device ID for "Video Mixer Control."
Select the same Device ID as the one you set for the video mixer in Step 4.
When set to Broadcast, control messages can be transmitted regardless of the setting for the video
mixer.
7.
Use "Presenter Connection Input" to set the input channel on the video mixer used to input
PR-80 video in Step 2.
8.
Go to "Video Mixer Control" and use "VFX1 Control" to set the MIDI message that controls the
video mixer's effects.
(Controls are not accepted via MIDI when this is set to [OFF].)
The effects are controlled with the selected MIDI message.
A MIDI value of 0 corresponds to "OFF," and values 1 through 127 correspond to "ON" (or to changes
in the parameter if the effect has variable parameters). Set "VFX2 Control" through "VFX4 Control" in
the same way.
Some video mixers may not support this feature.
This setting is shared with "Controlling Effects" (p. 95).
Select a Device ID
Select a MIDI message
Advertisement
