Technical Specifications - Fortinet FortiGate-40C Quick Start Manual

In addition to FortiExplorer, the FortiGate unit can be configured using the
Web-based Manager.
This section will step you through connecting to the unit using the
Web-based Manager.
To Connect to the Web-based Manager:
1. Connect the FortiGate unit Ethernet Port 1 to a management
computer using the provided Ethernet cable.
2. Configure the management computer to be on the same subnet as
the internal interface of the FortiGate unit:
a. Browse to the Network and Sharing Center > Change
Adapter Settings > Local Area Connection Properties
> Internet Protocol Version 4 (TCP/IPv4) Properties.
b. Change the IP address of the management computer
to 192.168.1.2 and the netmask to 255.255.255.0.
3. To access the FortiGate unit Web-based Manager, start a browser
of your choice and browse to https://192.168.1.99 (remember to
include the "s" in https://).
4. Type admin in the Name field, leave the Password field blank, and
select Login.
You can now proceed with configuring your FortiGate unit.

5. Technical Specifications

Power Jack USB Port
USB Console Port
Management Port
Interface Type Protocol
Ethernet Ports RJ-45 Gigabit Ethernet FortiASIC-accelerated switched Ethernet ports for
1 - 5
WAN1, 2 RJ-45 Gigabit Ethernet FortiASIC-accelerated Ethernet ports.
USB USB-A USB 2.0
USB MGMT USB-B USB 2.0
Console RJ-45 RS-232 serial
Hardware Specification
CPU
Internal Storage
Memory
AC Power
Power Consumption (Avg / Max)
Heat Dissipation
Wall Mountable
Kensington Security Slot
Reset Button
Ethernet Ports WAN Ports
Description
connection to your network.
USB server port for USB key, modem, or
management functions.
USB client port for management.
Optional connection to the management computer.
Provides access to the CLI.
Description
FortiASIC System-on-a-Chip (SoC)
Non-removable, 4GB Multi Level Cell (MLC) Nand Flash for
WAN Optimization
512MB (DDR2)
100-240V AC, 50-60HZ
12.3W / 14.8W
50.5BTU/h
Yes
Anti-theft security slot for attaching a lock-and-cable
apparatus.
Hold for 5 seconds to reset the FortiGate-40C to factory
default settings.
Reset Button