Epson Expression 13000XL User Manual page 16

Placing Originals on the Product
If the size of the original exceeds the size of the document cover, you can lift the document cover straight up
and remove it to make it easier to align the original. When you have finished scanning, replace the document
cover in the reverse order that you removed it.
Important:
c
❏ Before removing the document cover, make sure you raise it to the upright position to prevent the hinges
from snapping back on the springs.
❏ Do not force the cover off the scanner or lift the cover from in front of the cover hinge; otherwise, the cover
may be damaged.
2. Place a large or thick original face-down on the scanner glass. Make sure the top corner of the original is
aligned with the mark.
d
>
Placing Large or Thick Originals
16