Advertisement
Quick Links
Advertisement
Related Manuals for Hyundai HPO240-A
Summary of Contents for Hyundai HPO240-A
- Page 1 ORBITAL SANDER HPO240-A...
- Page 2 warning: read the following instructions before use the machine General safety warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Page 3 e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- Page 4 e) Never use damaged or worn abrasive sheets, or sheets that do not adhere firmly to the sanding pad. f) Never place your hand or fingers near the sanding pad while the sander is running. g) Keep the power cord well away from the work area. h) Keep the handle and sander clear of oil, grease, water and other liquids.
- Page 5 Do not dispose of old appliances with household waste Double insulation Description Technical data Model HPO240-A Tension 230-240V~ 50Hz Power 240W Non load speed 12000/min Sanding plate 125mm Accessories Paper abrasive...
- Page 6 Noise level The noise values are measured according to EN 62841. the actual measures are: Sound pressure level 85 dB (A), K=3 dB (A) Sound power level 96 dB (A), K=3 dB (A). Wear a hearing protection Vibrations Vibration values are according EN 62841. Ah=9.7 m/s , K=1,5m/s The declared vibration total value has been measured in accordance with a standard test...
-
Page 7: Maintenance
When the sanding pad is worn, it no longer has a firm grip on the sanding sheet, so it must be replaced. Assembly of a dust collector Use a dust extraction device suitable for the material. Insert the connection adapter into the outlet of the sander. For the suction of dust particularly harmful to health, carcinogenic or dry, use specific vacuums. - Page 8 Others Replacement of the power cord must be done by an electrical specialist. Check all fasteners for proper tightening. In order to make optimal use of the power tool, always use original accessories, which are available in all specialty stores. Disposal This product should not be disposed of with household waste but must be supported by a separate collection system.
- Page 9 ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Tel: +33 (0)5.34.502.502 Fax: +33 (0)5.34.502.503 Declare that the following machine: ORBITAL SANDER HPO240-A Serial number： 20201001395-20201003314 Is in conformity with the Directive Machine 2006/42/CE and to the regulations transposing it...
-
Page 10: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 11: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 12: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...