Operating the Unit
fig.05
6
5
10
3
4
1. When you have made the necessary
connections, set the knobs as shown in
the illustration.
2. Depress the pedal switch to turn the
effect on. (Make sure that the CHECK
Indicator lights.)
3. Adjust the speed of the chorus effect
using the RATE Knob.
4. Adjust the depth of the chorus effect
using the DEPTH Knob.
5. Using the LOW FILTER Knob, adjust
the frequency band to which the cho-
rus effect should be applied.
6. Adjust the volume of the processed
sound using the E. LEVEL Knob.