Connection Example; Precautions When Connecting And Turning On The Power - Edirol MA-10A Owner's Manual

Connections
Attaching the Rubber Feet
(Included)

Connection Example

INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Sound Module, CD Player, MD Player, etc.
Precautions When Connecting
and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
926 modify
• Using a connection cable that contains a resistor can cause
the sound level to be low. Use a connection cable that does
not contain a resistor.
941
• Once the connections have been completed, turn on
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other
devices. (When turning the power off, reverse this
procedure.)
< Connected devices
943
• Always make sure to have the volume level turned down
before switching on power. Even with the volume all the
way down, you may still hear some sound when the
power is switched on, but this is normal, and does not
indicate a malfunction.
MA-10D only
Front Panel
Priority (*)
* When you connect a cable to the
DIGITAL IN on the front panel, the
sound of any devices connected to
the DIGITAL INs on the rear panel
will not be heard.
MA-10D/MA-10A >
Rear Panel
Select
7