Precautions When Connecting And Turning On The Power; Connection Example - Edirol MA-5A Owner's Manual

Connections
Precautions When Connecting and Turning on the
Power
921
• To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.
926_fix
• Using a connection cable that contains a resistor can cause the sound level to be low. Use a
connection cable that does not contain a resistor.
941
• Once the connections have been completed, turn on power to your various devices in the order
specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage
to speakers and other devices. (When turning the power off, reverse this procedure.)
The devices must be turned on in this order.
Connected devices
942
• This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is
required before the unit will operate normally.

Connection Example

fig.5e
INPUT
(FROM RIGHT)
Sound Module, CD Player, MD Player, etc.
MA-5D/MA-5A
OUTPUT
(TO LEFT)
MA-5D
only
15