Table of Contents
Advertisement
Embroidering preparation
Selecting the stitch plate in the User Interface
After changing the stitch plate, you can check whether it can be used with the selected needle.
> Tap «Stitch Plate/Needle Selection».
> Select CutWork/Straight stitch plate.
Thread-up command
The machine must be ready for embroidery to bring up the bobbin thread.The bobbin thread can be brought
up in one step for a manual knotting. If no securing stitches are wanted, it is recommended to deactivate the
securing stitches in the Setup.
> Hold the upper thread.
> Push the button«Presser Foot Up/Down».
–
The bobbin thread is brought up automatically.
13.5 Embroidery hoop
Overview Embroidery hoop selection
1
1
Hoop selection
135
Advertisement
Table of Contents
