CLEANING & LUBRICATION INSTRUCTIONS
•
After each use, hold the shaver over a bin and remove the top of the
shaving head.
•
Pull the cutting head unit off the head assembly (fig. A).
f
•
Empty the clippings that have collected inside the hair pocket into the
bin.
•
The head can be rinsed under a running tap (fig. B).
•
Use a cleaning brush to remove any shaving debris.
k
•
Shake off excess water and allow to dry before reassembly.
•
To maintain optimum performance, the blades must be
e
kept lubricated.
•
Apply a very small drop of light oil onto the inside of each separate
l
cutter head. Hair clipper oil or sewing machine oil are suitable for this
purpose.
•
Oil should be applied weekly or if the shaver begins to 'pulse'
m
indicating lubrication is required.
(Silicone based pressure pack lubricants are not recommended.)
A
B
12
g
j
i