Table of Contents
Advertisement
8.) AVOID UNINTENTIONAL STARTING - Donʼt carry plugged in appliance with finger
on switch. Be sure switch is off when plugging in.
9.) DONʼT FORCE APPLIANCE. It will do the job better and with less likelihood of a risk
of injury at the rate for which it was designed.
10.) DONʼT OVERREACH - Keep proper footing and balance at all times.
11.) STAY ALERT - Watch what you are doing. Use common sense. Do not operate
appliance when you are tired.
12.) STORE IDLE APPLIANCE INDOORS - When not in use, appliances should be
stored indoors in a dry, and high or locked-up place- out of reach of children.
13.) CHECK DAMAGED PARTS - Before further use of the appliance a guard or other
part that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and any other condition that may
affect its operation. A guard or other part that is damaged should be properly repaired
or replaced by an authorized service center unless otherwise indicated elsewhere in
this manual.
14.) KEEP HANDS AWAY FROM BLADES. Donʼt grasp the exposed cutting blade
when picking up or holding the appliance.
15.) MAINTAIN APPLIANCE WITH CARE - Keep cutting edge sharp and clean for best
performance and to reduce the risk of injury. Follow instructions for lubricating and
changing accessories. Inspect appliance cord periodically, and if damaged, have it
repaired by an authorized service facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean, and free from oil and grease.
8
9
7
Functional Description
1. Battery
2. Battery release button
3. On/off switch
4. Lock-off button
5. Claw release button
6. Claw stop
7. Claw
8. Blade clamp release lever
9. Shoe
10. Charger
4
6
6
5
3
1
2
1
10
Advertisement
Table of Contents
