Table of Contents
Advertisement
To reduce your exposure to these chemicals, wear approved safety equipment such
as dust masks that are specially designed to filter out microscopic particles.
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR
WARNING:
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise
WARNING:
from this product may contribute to hearing loss.
WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS
TO REDUCE RISK OF INJURY:
• Before any use, be sure everyone using this tool reads and understands all safety
instructions and other information contained in this manual.
• Save these instructions and review frequently prior to use and in instructing others.
should always be followed to reduce risk of fire, electric shock, and personal injury,
WARNING:
including the following:
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL
TOOLS
1.) AVOID DANGEROUS ENVIRONMENT - Donʼt use appliances in damp or wet locations.
2.) DONʼT USE IN RAIN.
3.) KEEP CHILDREN AWAY - All visitors should be kept at a safe distance from the work area.
4.) DRESS PROPERLY - Donʼt wear loose clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and substantial footwear is recommended when
working outdoors. Wear protective hair covering to contain long hair.
5.) USE SAFETY GLASSES - Also use face or dustmask if operation is dusty.
6.) USE RIGHT APPLIANCE - Do not use appliance for any job except that for which it is
intended.
7.) EXTENSION CORD. Make sure your extension cord is in good condition. When
using an extension cord be sure it is heavy enough to carry the current your product
will draw. An undersized extension cord will cause a drop in line voltage resulting in
loss of power and overheating. The following table shows the correct size to use
depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
Volts
120V
240V
Ampere Rating
More
Than
0
6
10
12
ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
Always wear proper personal hearing protection that conforms
When using electric gardening appliances, basic safety precautions
READ ALL INSTRUCTIONS.
Minimum Gauge for Cord Sets
Total Length of Cord in Feet
0-25
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
0-50
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Not more
Than
-
6
18
-
10
18
-
12
16
-
16
14
26-50
51-100
51-100
101-200
American Wire Gauge
16
16
16
14
16
14
12
Not Recommended
5
101-150
201-300
14
12
12
Advertisement
Table of Contents
