Roland GW-7 Midi Implementation Manual page 14

Roland GW-7 MIDI Implementation
In the following map, the control numbers of the control changes are indicated as CC#.
Address (H) Size (H) Data (H)
40 1x 00 00 00 02 00 - 7F
40 1x 01# 00 - 7F
40 1x 02 00 00 01 00 - 10
40 1x 03 00 00 01 00, 01
40 1x 04 00 00 01 00, 01
40 1x 05 00 00 01 00, 01
40 1x 06 00 00 01 00, 01
40 1x 07 00 00 01 00, 01
40 1x 08 00 00 01 00, 01
40 1x 09 00 00 01 00, 01
40 1x 0A 00 00 01 00, 01
* When "GM1 System On" or "GM2 System On" is received, Rx. NRPN will be set OFF. When "GS Reset" is received, it will be set ON.
Address (H) Size (H) Data (H)
40 1x 0B 00 00 01 00, 01
40 1x 0C 00 00 01 00, 01
40 1x 0D 00 00 01 00, 01
40 1x 0E 00 00 01 00, 01
40 1x 0F 00 00 01 00, 01
40 1x 10 00 00 01 00, 01
40 1x 11 00 00 01 00, 01
40 1x 12 00 00 01 00, 01
40 1x 13 00 00 01 00, 01
40 1x 14 00 00 01 00 - 02
Single: If the same note is played multiple times in succession, the previously-sounding note will be completely silenced, and then the new note will be sounded.
LimitedMulti: If the same note is played multiple times in succession, the previously-sounding note will be continued to a certain extent even after the new note is sounded (default setting).
FullMulti: If the same note is played multiple times in succession, the previously-sounding note(s) will continue sounding for their natural length even after the new note is sounded.
* ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly struck notes).
This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.
Address (H) Size (H) Data (H)
40 1x 15 00 00 01 00 - 02
* This parameter sets the Drum Map of the Part used as the Drum Part. The GW-7 can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial settings,
Part10 (MIDI CH=10, x=0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF(0)).
Address (H) Size (H) Data (H)
40 1x 16 00 00 01 28 - 58
40 1x 17 00 00 02 08 - F8
40 1x 18#
* PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter
in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for
PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.
Address (H) Size (H) Data (H)
40 1x 19 00 00 01 00 - 7F
40 1x 1A 00 00 01 00 - 7F
40 1x 1B 00 00 01 00 - 7F
40 1x 1C 00 00 01 00 - 7F
40 1x 1D 00 00 01 00 - 7F
40 1x 1E 00 00 01 00 - 7F
40 1x 1F 00 00 01 00 - 5F
40 1x 20 00 00 01 00 - 5F
40 1x 21 00 00 01 00 - 7F
40 1x 22 00 00 01 00 - 7F
14
Parameter Description
TONE NUMBER CC# 00 VALUE 0 - 127
P.C. VALUE 1 - 128
Rx. CHANNEL 1 - 16, OFF
Rx. PITCH BEND OFF/ON
Rx. CH PRESSURE(CAf) OFF/ON
Rx. PROGRAM CHANGE OFF/ON
Rx. CONTROL CHANGE OFF/ON
Rx. POLY PRESSURE(PAf) OFF/ON
Rx. NOTE MESSAGE OFF/ON
Rx. RPN OFF/ON
Rx. NRPN OFF/ON
Parameter Description
Rx. MODULATION OFF/ON
Rx. VOLUME OFF/ON
Rx. PANPOT OFF/ON
Rx. EXPRESSION OFF/ON
Rx. HOLD1 OFF/ON
Rx. PORTAMENTO OFF/ON
Rx. SOSTENUTO OFF/ON
Rx. SOFT OFF/ON
MONO/POLY MODE Mono/Poly
(=CC# 126 01/CC# 127 00)
ASSIGN MODE 0 = SINGLE
1 = LIMITED-MULTI
2 = FULL-MULTI
Parameter Description
USE FOR RHYTHM PART 0 = OFF
1 = MAP1
2 = MAP2
Parameter Description
PITCH KEY SHIFT -24 - +24 [semitones]
PITCH OFFSET FINE -12.0 - +12.0 [Hz]
Use nibblized data.
Parameter Description
PART LEVEL 0 - 127
(=CC# 7)
VELOCITY SENSE DEPTH 0 - 127
VELOCITY SENSE OFFSET 0 - 127
PART PANPOT -64(RANDOM),
-63(LEFT)- +63(RIGHT)
(=CC# 10, except RANDOM)
KEYBOARD RANGE LOW (C-1)-(G9)
KEYBOARD RANGE HIGH (C-1)-(G9)
CC1 CONTROLLER NUMBER 0 - 95
CC2 CONTROLLER NUMBER 0 - 95
CHORUS SEND LEVEL 0 - 127
(=CC# 93)
REVERB SEND LEVEL 0 - 127
(=CC# 91)
Default Value (H) Description
00 0
00 1
Same as the Part Number
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
00(01*) OFF(ON*)
Default Value (H) Description
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
01 Poly
01 LIMITED-MULTI
00 at x=0 SINGLE(Drum Part)
01 at x≠0 LIMITED-MULTI(Normal Part)
Default Value (H) Description
00 at x≠0 OFF(Normal Part)
01 at x=0 MAP1(Drum Part)
Default Value (H) Description
40 0 [semitones]
08 00 0 [Hz]
Default Value (H) Description
64 100
40 64
40 64
40 0(CENTER)
00 C-1
7F G 9
10 16
11 17
00 0
28 40