Using The On-Screen Menus - InFocus LitePro LP720 Manual

Standby
When you press
standby
blank screen is displayed for 15 minutes. After 15 minutes, the
lamp goes out if you haven't pressed any other buttons.
If you press any button again within 15 minutes, the projector
•
returns to normal operations immediately.
If you press
•
standby
30 second delay before the lamp turns back on.
Video
When you have more than one source (computer or LiteShow Pro
and video) connected to the projector, select between them by
pressing the button for the source you want.
Press to display the image from your video player.
video
Volume
To increase the volume, press
•
To decrease the volume, press
•
Volume adjustments are saved for each source you have con-
nected.

Using the On-Screen Menus

The projector has four on-screen menus that allow you to make
image adjustments and change a variety of settings. Most of these
adjustments aren't available directly from the keypad.
To open the on-screen menus, press the
pad. Press again when you want to close the menus and
menu
save any changes.
To select a menu, use the disk mouse on the keypad or remote to
move the cursor to the tab for the menu you want, then click
either mouse button.
All manuals and user guides at all-guides.com
, the display and audio turn off and a
again after 15 minutes, there is about a
menu
button on the key-
29