Rockford Fosgate Punch 300X Installation And Operation Manual page 9

3-Channel Wiring
• RCA OR High Level Inputs connect to
Front or Front and Rear
• Signal Imput Switch set to 2 or 4
NOTE: Reverse polarity on subwoofer if
front channel is set to HP (High
Pass) and rear channel is set to LP
(Low Pass)
4-Channel Wiring
• RCA OR High Level Inputs
connect to Front and Rear
• Signal Imput Switch set to 4
CAUTION: Use only one input configuration. Using both the RCA and High Level
!
inputs will cause undesirable operation.
I
NSTALLATION
9