RocketFish RF-LTRMS User Manual page 6

Connecting the receiver to the computer
To connect the mouse receiver to the computer:
• Plug the USB receiver into an available USB port on your
computer. The receiver's LED turns red, and your
computer identifies the receiver and begins installing the
default driver.
screen, follow the on-screen prompts to complete the driver
installation.
Linking the mouse and receiver
The mouse has 256 identification codes that allow the mouse
and its receiver to operate without interference from other RF
devices. After your computer detects the USB receiver and the
default driver is installed, you must make a communications link
between the mouse and its receiver before you can use the
mouse.
To make a communications link:
1 Press and release the link button on the receiver. The
receiver's status light blinks green when the receiver is
activated.
6
: If a message or dialog box appears on the
Receiver link button