Table of Contents
Advertisement
3.3
User Account and Camera Setup on iPhone
What you need
Wi-Fi ® Camera Unit
•
•
Power adapter for the Camera
iPhone ® /iPad ® with iOS version 9.0 and above
•
3.3.1
Power ON and Connect the Camera
•
Connect the power adapter to an electrical outlet and insert the plug into
the micro USB socket on the side of the Camera Unit.
•
During the start-up sequence the camera will pan from left to right and stop
in the parked position. You will hear a voice prompt "Your camera is now
starting". (This will take approximately 30 seconds.)
•
The Camera's Red LED Flashes after the Camera has finished booting.
3.3.2
Download Hubble for Motorola Monitors App
•
Go to App Store to search for "Hubble for Motorola Monitors".
•
Download "Hubble for Motorola Monitors" App and install it on your
iPhone ® /iPad ® .
3.3.3
Run Hubble for Motorola Monitors App on iPhone
Ensure that your iPhone ® /iPad ® is connected to your Wi-Fi ® Router.
•
•
Run the "Hubble for Motorola Monitors" App, enter your account
information, read through the Terms of Service, and then select "By signing
up you agree to our Terms & Conditions" before you tap SIGNUP. (Picture i1)
14
®
/iPad
®
Getting started - Connecting Devices
®
®
/iPad
Advertisement
Table of Contents
