Contents Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth wireless headphone 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Connect to ANC(active noise...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat Do not drop your headphones. Hearing Safety Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water.
Bluetooth in-ear headphones Audio cable with micro USB plug Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/support. With this Philips in-ear headphones, Quick start guide you can: •...
Overview of your Bluetooth wireless headphone Voice Assistant button Micro USB charging slot ANC On/O /Ambient sound button ANC On/O /Ambient sound LED indicator Volume / Track control button LED indicator (Power On / O / Pairing) ...
Normally, a full charge takes 2 hours. Activate the Bluetooth feature of your mobile phone, select Philips PN505 Enter the headphone password “0000” (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to...
4 Use your headphone When the ANC function is not required, switch o the ANC button to continue your call or listening to music. Connect the headphone Enable Ambient sound mode to your Bluetooth device • Press once ANC button to enable Ambient sound.
Call control Connect to airline audio Task Button Operation systems Pick up/ On/o , Press once. hang up a music/ Connect the audio cable into the call. call control plane adapter. Switch Press twice. On/o , caller music/- during a call call.
5 Technical data Music time ANC enabled with Bluetooth: 9 hours | ANC disabled with Bluetooth: 14 hours Talk time ANC enabled with Bluetooth: 9 hours | ANC disabled with Bluetooth: 14 hours Standby time ANC enabled with Bluetooth: 160 hours | ANC disabled with Bluetooth: 160 hours Charging time: 2 hours Rechargeable lithium polymer...
We Compliance with EMF strongly advise you to take your product to an o cial collection point or a Philips This product complies with all applica- service centre to have a professional ble standards and regulations regarding remove the rechargeable battery.
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to Environmental information correct the interference by one or more of the following measures: All unnecessary packaging has been Reorient or relocate the receiving antenna. omitted.
7 Trademarks Bluetooth The Bluetooth word mark and logos ® are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade- marks and trade names are those of their respective owners.
8 Frequently My Bluetooth headphone is connected to a Bluetooth stereo enabled mobile phone, asked but music only plays on the mobile phone speaker. questions Refer to the user manual of your mobile phone. Select to listen to music through the headphone.
Page 14
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its a liates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.