APRILIA SHIVER 750 ABS 2010 Manual page 123

Table of Contents

Advertisement

CHECK AND TOPPING-UP
Shut off the engine and wait until
it cools off.
Keep the vehicle upright and
with the two wheels on the
ground.
Turn the handlebar to the left,
keeping the vehicle upright.
Make sure that the coolant level
in the expansion tank is be-
04_09
tween the "MAX" ("MAX"= max-
imum level) and "MIN" ("MIN"=
minimum level) reference marks
Otherwise:
Remove the right duct.
Remove the filler cap (1).
Top up with the recommended
coolant until the level is near the
"MAX" reference mark. Do not
exceed this level or the coolant
will spill out when the engine is
turning.
Refit and lock the filler cap (1).
04_10
DE KOELVLOEISTOF UIT WANNEER
DE MOTOR KOUD STAAT
CONTROLE EN BIJVULLING
Leg de motor stil en wacht tot hij
afgekoeld is.
Houd het voertuig in verticale
positie met de twee wielen op de
grond.
Draai het stuur naar links en hou
het voertuig in de verticale posi-
tie.
Controleer of het vloeistofpeil in
het expansievat zich tussen de
referenties "MAX" ("MAX"=
maximum peil) en
"MIN" ("MIN"= minimum peil)
bevindt
In het omgekeerde geval:
Verwijder het rechter kanaal.
Verwijder de vuldop (1).
Vul bij met aanbevolen koel-
vloeistof, tot het vloeistofpeil on-
geveer de referentie "MAX" be-
reikt. Overschrijd dit peil niet,
anders zal de vloeistof tijdens
de werking van de motor uitstro-
men.
Herplaats en blokkeer de vuldop
(1).
123

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shiver 750 2010

Table of Contents