Yamaha Super Tenere ABS 2018 Owner's Manual page 42

Instrument and control functions
The traction control system mode can
be changed only when the vehicle is
stopped.
 Push the "TCS" button to change
between modes "1" and "2".
 Push the button for two seconds
to select "TCS OFF" and turn the
traction control system off. Push
the button again to return to the
previously selected mode.
3
Resetting
The traction control system will disable
in the following conditions:
 excessive rear wheel spinning
 the front or rear wheel comes off
the ground while riding
 either wheel is rotated with the key
turned to "ON" (such as when per-
forming maintenance)
If the traction control system has been
disabled, both the traction control sys-
tem indicator light and the engine trou-
ble warning light come on.
Should this occur, try resetting the sys-
tem as follows.
1. Stop the vehicle and turn the key
to "OFF".
2. Wait a few seconds and then turn
the key back to "ON".
3. The traction control system indi-
cator light should turn off and the
system be enabled.
TIP
If the traction control system indicator
light remains on after resetting, the mo-
torcycle may still be ridden. However,
have a Yamaha dealer check the vehi-
cle as soon as possible.
4. Have a Yamaha dealer check the
vehicle and turn off the engine
trouble warning light.
3-28