Advertisement
English
FUNCTIONAL DESCRIPTION
1.
Battery Level Warning Lamp
The battery level can be checked by pulling the
trigger switch while the power tool is in a no-load
state. The battery level warning lamp lights when
the battery power is very low. If this happens,
charge the battery. (Fig. 4)
NOTE
The level at which the battery level warning lamp
○
lights may vary due to the ambient temperature,
characteristics of the battery, etc. and is intended
only as a guide.
The battery level warning lamp may light when the
○
power tool is overloaded. This does not mean that
the battery power is very low.
Be sure to check the battery level while the tool is in
a no-load state.
2.
Lock Off button (Fig. 5)
WARNING
Never lock the Lock Off button in depressed
position.
Pulling back the switch would then cause the
tool to suddenly start operating, which could
result in injury.
The tool will not start unless the Lock Off button is
pressed while the switch is pulled back.
The Lock Off button can be engaged by pressing it
either from the right or left.
When the switch is released, the Lock Off button
automatically disengages to prevent inadvertent
motor startup.
3.
Blade case (Fig. 6) (Standard accessory with
CH10DL (CG), CH10DL)
When the shrub shear blade is to be attached to
or removed from the tool, or when the shear is not
used, place the blade in the blade case to prevent injury.
4.
Blade cover (Fig. 7) (Standard accessory with CH10DL (CG), CG10DL)
When the grass shear blade is to be attached to or removed from the tool, or when the
shear is not used, place the blade in the blade cover to prevent injury.
Blade case
Blade
cover
38
Battery level
warning lamp
Fig. 4
Lock off button
Trigger switch
Fig. 5
Blade
Fig. 6
Blade
Fig. 7
Advertisement
