User Settings - TCS TASTA Series Manual

Audio indoor station series tasta
Hide thumbs Also See for TASTA Series:
Table of Contents

Advertisement

Available languages

Available languages

BEDIENELEMENTE
Volume down button (call OFF)
– Deactivate/activate ring ton mute
– Decrease volume for ringing tone and
speech
– Ringing tone selection: jump back one
ringing tone
– quit the ring tone selection
Function key
– trigger with the function key:
Control function, Activate automatic door
opener, Call forwarding to a second
indoor station, Internal call, calling a
second indoor station
These alternative settings are made by your electrician.
Speech button
– Accept and quiet a call
– Enable/disable answering machine

USER SETTINGS

Call volume
The call volume can be changed in 8 steps during an existing voice connection. Press the Volume up or
Volume down key repeatedly until you have set the desired call volume.
Ringtone level
There must be no voice communication.
f Press the Volume up or Volume down key repeatedly until you have set the desired ringing tone
volume. The ringing tone is played back at the current ringing tone volume and saved automatically.
Selecting the ring tone
You can select from 13 different ring tones.
There must be no voice connection.
f Press the volume up button for approx. 8 s. All LEDs light up and an acknowledgement tone sounds.
f Select the ring tone by pressing the corresponding key:
Door release button for door call 1 (call of the main front-door station)
Speech button
Function key
Light switch button for floor call (call when pressing the floor button at the apartment door)
f Press the Volume up or Volume down button repeatedly until the desired ringing tone is heard.
f Press the volume down button to end the ringing tone selection. Alternatively, the ringing tone elec-
tion is ended automatically after 8 s.
for door call 2 (call of a second front-door station)
for internal call (call from indoor station to indoor station)
Volume up button
– Activate Ring tone
– Increase volume for ringing tone and
speech
– Ring tone selection: jump forward one
– Activate ringing tone selection
Light switch button
– Switching the corridor light
– Operation answering machine
– Alternative functions (control function,
internal call)
These alternative settings are made by your electrician.
Door release button
– Open the door
– Trigger light switching function if this is
activated in the front-door station
EN
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Isw6010-0145Isw6031-0145

Table of Contents