Operation - TCS TASTA Series Manual

EN
Ambient illumination
Ambient illumination is activated at the factory.
f Press the light switch button for 3 s to de-/activate the ambient illumination.
ring tone de-/activate
f Press the volume down button for 8 seconds. The ring tone is deactivated and the red LED lights up.
f Press the volume down or the volume up button briefly. The ring tone is activated and the red LED
goes out.

OPERATION

Accepting a door call
A ring tone and the illumination of the green LED signal a call.
f Shortly press the speech button to answer the call.
f Briefly press the speech button again to end the call. Alternatively, press the door release button,
The door opener is triggered and the call is ended after 4 seconds. The call is automatically dis-
connected after 2 minutes.
Accepting internal call
A ring tone and the illumination of the green LED signal a call from an indoor station.
f Shortly press the speech button to answer the call.
f Briefly press the speech button again to end the call.
Open the door
f Briefly press the door release button to open the door. The blue LED lights.
Switch on light
When an incoming door call or an existing speech connection is established, you can switch the light
(e.g. switch on staircase lighting).
f Press the light button briefly. The light is switched on.
Answering machine
(De-) activate the answering machine:
f Press the speech button for 8s. A signal tone sounds and the green LED flashes. The answering
machine function is activated.
f Press the speech button again for 8 seconds. A signal tone sounds and the green LED is off.
The answering machine function is deactivated.
Messages are stored in the indoor station and can be listened to again when the answering
machine function is activated.
10
Service Fon. +49 4194 9881-188 | E-Mail hotline@tcsag.de