D-Link DIR-806A Quick Installation Manual page 23

Wireless ac750 dual band router

Hide thumbs Also See for DIR-806A:

DIR-806A

Configuring WAN Connection

This configuration step is available for the Router and WISP Repeater

modes.

You should configure your WAN connection in accordance with data

provided by your Internet service provider (ISP). Make sure that you have

obtained all necessary information prior to configuring your connection.

Otherwise contact your ISP.

1. On the Internet connection type page, from the Connection type

list, select the connection type used by your ISP and fill in the fields

displayed on the page.

Static IPv4: Fill in the following fields: IP address, Netmask, Gateway IP

address, and DNS IP address.

Static IPv6: Fill in the following fields: IP address, Prefix, and Gateway

IP address.

Quick Installation Guide