Advertisement
Memory Protection
• Execution Prevention
Values: Disabled, Enabled
Descriptions: Some computer viruses and worms cause memory buffers to overflow. By enabling this
option, you can protect your computer against attacks from such viruses and worms. If the option is
enabled but you find that a program does not run properly, disable this option first and then reset the
settings.
Virtualization
• AMD-V(TM) Technology
Values: Disabled, Enabled
Descriptions: If you select Enabled, a VMM can utilize the additional hardware capabilities provided by
AMD Virtualization™ technology.
I/O Port Access
Descriptions: Use this submenu to enable or disable the following hardware features:
• Ethernet LAN
• Wireless LAN
• Wireless WAN
• Bluetooth
• USB port
• Memory card slot
• Smart card slot
• Integrated camera
• Microphone
• Fingerprint reader
Internal Device Access
• Bottom Cover Tamper Detection
Values: Disabled, Enabled
Descriptions: When this option is enabled, supervisor password is required when a bottom cover tamper
is detected. This option is not functional until a supervisor password is set.
• Internal Storage Tamper Detection
Values: Disabled, Enabled
Descriptions: When this option is enabled, removing any internal storage device when your computer is in
sleep mode will be detected. If you remove the internal storage device while the computer is in sleep
mode, the computer will shut down when you wake it up, and any unsaved data will be lost.
Anti-Theft
• Computrace Module Activation
Values: Disabled, Enabled, Permanently Disabled
Descriptions: Enable the UEFI BIOS interface to activate the computrace module. Computrace is an
optional monitoring service from Absolute Software. If you select Permanently Disabled, you cannot
enable this setting again.
.
Chapter 5
Advanced configuration
63
Advertisement
