Media Type; Paper Source; Resolution - Ricoh AP400 Operating Instructions Manual

Media Type

Use this to select the paper type.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP/Serv-
er 2003
Windows NT 4.0
Macintosh
Reference
For more information about the media type supported by this printer, see "Pa-
per and Other Media Supported by This Printer" in the Printer Reference.

Paper source

Use this to select the paper sources.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP/Serv-
er 2003
Windows NT 4.0
Macintosh

Resolution

Use this to set the resolution to [600dpi] or [1200dpi].
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP/Serv-
er 2003
Windows NT 4.0
Macintosh
[Type:] on [All Pages] on the [Paper] tab.
[Media:] on the [Paper/Quality] tab in the Printing Prefer-
ence Properties.
[Paper/Output] on the [Advanced] tab in the Document De-
faults.
[Paper Type:] on [Printer Specific Options] in the print dialog
box.
[All Pages] on the [Paper] tab.
The [Paper/Quality] tab in the Printing Preferences Proper-
ties.
The [Page Setup] tab.
[Paper Source:] on [General] in the print dialog box.
[Resolution] on the [Print Quality] tab
[Graphic] on [Advanced...] on the [Paper/Quality] tab in the
Printing Preferences Properties
[Graphics] on the [Advanced] tab
[Printer Specific Options] in the print dialog box
Setting up Options
9
1