Recording A Cd: Selecting Tape Length (Tape Select Edit); Recording A Cd: Specifying Tape Length (Time Edit) - Sony MHC-W55 Operating Instructions Manual

Recording a CD:
Selecting Tape
Length (tape select
edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
SYSTEM
POWER m ON
3
Æ
»
p
0 )
r P
⁄
6 7
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press § OPEN/CLOSE/EX-CHANGE
and place a CD. Then, press § OPEN/
CLOSE/EX-CHANGE again to close the
CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
3
Press EDIT.
"TAPE SELECT" appears and the player
divides the selections automatically.
Then the display changes as follows:
CD
1 2 3 4 5
6 7 8
63 125 250 500 1k 2k 4k
ALL DISCS
Tape length required
CD
1 2 3 4 5
6 7 8
63 125 250 500 1k 2k 4k
ALL DISCS
4
Insert a blank tape of the indicated
length (or longer) into deck B.
16 Chapter 4: the Tape Player
5
Select dual or single-sided recording.
To record
One side of the tape
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
6
Press CD SYNCHRO.
Deck B stands by for recording.
7
Press P PAUSE to release recording
pause.
Recording starts. After about 10
seconds, the CD starts playing.
1
p
» P
⁄ p
2
»
Æ
p
p
0 )
⁄
4 5
A VOLUME
DOLBY NR B OFF
8k 16k(Hz)
DBFB
A VOLUME
DOLBY NR B OFF
8k 16k(Hz)
DBFB
Recording a CD:
Press DIRECTION
Specifying Tape
MODE to select
A
Length (time edit)
ß or RELAY
You can have the stereo system create
programmes that will fit the tape length.
For example, if you use a 40-minute tape to
record a 46-minute CD, the CD player will
automatically choose tracks that will fit
within the 40-minutes, filling as much of
the tape as possible. The player will not
programme those tracks beyond track
number 20. Use the buttons on both the
unit and the remote to do this operation.
3,
5,
6
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press § OPEN/CLOSE/EX-CHANGE
and place a CD.
Then, press § OPEN/CLOSE/
EX-CHANGE again to close the CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
SYSTEM
POWER m ON
» P
⁄
p
Æ »
Æ
»
p p
0 ) 0 )
r P
⁄ ⁄
9 10 7
DOLBY NR
=/+
CHECK
1
4
p
2
p
8