Air breaker
Removal and Replacement
1. Remove shell. (see shell removal and installation)
2. Take out absorbing cotton, upper basket and lower basket.
3. Contrarotate nut of air breaker and take out it.
4. Pull out terminal of air breaker, and unfit snaps of air breaker fixing on softener.
5. Turn the dishwasher machine, remove the cover of bottom board. (see main control board
removal and installation)
6. Remove all clamps for fixing connecting hoses to air breaker.
7. Reverse the above procedure to install. And check out all connectors connected well.
Inner pipe
Removal and Replacement
1.
Take out upper basket and lower basket.
2.
Unfit snap of inner pipe, and take it off.
3.
Reverse the above procedure to install.
snap
clamps
17
snap