Appliance Configuration; Configure The Power Level - Bosch Tronic 4000 Series Installation And Operating Instructions Manual

▶ Turn on a hot water tap for 1 minute to purge air from the
appliance.
Fig. 31
[1] Hot water tap
5.9

Appliance configuration

CAUTION
Risk of electric shock!
Before configuring the appliance,
▶ Turn off the electric supply at the electrical cabinet.
It is possible to configure several parameters on the same
appliance.
Tronic 4000 – 6721830066 (2021/06)
Installation (only for approved contractors)
▶ Use the electronic Jumpers provided to carry out the
different appliance configurations.
Fig. 32 Supplied electronic Jumpers
▶ Save the removed Jumpers for future changes or
installations.
Fig. 33

5.9.1 Configure the power level

▶ Use jumpers J2 and J3 to configure the power level of the
appliance, according to the table below.
19