Raymarine SmartController User Manual page 35

Hardware and Software version numbers
Use this option to display the current hardware revision and the software
version numbers for the SmartController. At VERSION, press the SELECT
key to display the information.
Self test
Press SELECT to start the unit test sequence and then follow the on-screen
instructions. This will test the display, buzzer and button functions.
Diagnostics
Press PILOT to display the the status of the wireless link.
Handset Registration
Raymarine wireless systems require each wireless controller to be
"registered" to a basestation. This registration process is to prevent
unauthorised control of your boat by another wireless user.
Note: There may be instances where you want to move your controller to
another boat and use it with another system. In this case, you will need to
de-register from the current system and register with the new system. You
can do this using the REGISTRATION function.
To register a handset
HANDSET
At REGISTRATION, press SELECT.
NOT
If the SmartController is not registered,
REGISTERED
then the display will read HANDSET NOT
REGISTERED. Press REG to start the
registration process.
CANCEL REG
DD7677-1
The SmartController will now search for
the basestation, you can press EXIT at any time to stop the search. When
the basestation is found by the SmartController and registration is
complete, the display will read REGISTERED TO BASESTATION.
User Guide 35