Bush Hog SBX48 Operator's Manual page 24

Your Box Blade should now be assembled and inspected for any evidence of defective or damaged parts
before use. Any evidence of damage should be reported to your dealer immediately. After the Three-Point
Hitch is attached, carefully remove safety blocks from Moldboard pivot Point.
This section of the Operator's Manual is designed to familiarize, instruct, and educate safe and proper blade
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a box blade and are not necessarily of this blade. Some pictures may show shields
removed for purposes of clarity. NEVER OPERATE this implement without all shields in place and in good
operational condition. The operator must be familiar with the blade and tractor operation and all associated
safety practices before operating the blade and tractor. Proper operation of the blade, as detailed in this
manual, will help ensure years of safe and satisfactory use of the box blade.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Death or serious
injury may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
SBX 48/60/65/72/78/84 09/20
© 2020 Alamo Group Inc.
OPERATION
BOX BLADE
OPERATION INSTRUCTIONS
Operation Section 3-2
(SG-2)