1. NO POWER PROBLEM
No power problem occurs when you power on the unit.
1-1. Solution
Replace XL301, IC307, IC305.
1-2. How to troubleshoot (Countermeasure)
1) Check XL301(Crystal).
If it does not oscillate, replace XL301.
2) Check IC307(Reset IC).
If its output voltage is not more than +3 V, replace IC307.
3) Check IC305(DSP IC).
After Power is ON, if the pin153, 154, 155, 156 of IC305 is no signal, replace IC305.
But, the new flash IC need to write program.
1-3. Service hint (Any picture/ Remark)
IC307
IC307
ONE POINT REPAIR GUIDE
XL301
XL301
IC305
IC305
< MAIN board top view >
3-2