HP Pavilion x360 Service Manual page 71

e. Disconnect both ends of the TouchScreen board cable from the two connectors on
the TouchScreen board.
f. Release the adhesive strip (1) that secures the display panel cable connector to the display panel.
g. Disconnect the display panel cable (2) from the display panel.
h. Remove the display panel assembly (3).
The display panel assembly is available using the following spare part numbers:
● 925447-001 – 14.0-in, F-inHD, WLED, BrightView, TouchScreen equipped with an
infrared camera
● 924297-001 – 14.0-in, FHD, WLED, BrightView, TouchScreen equipped with a non-
infrared camera
● 924298-001 – 14.0-in, HD, WLED, AntiGlare, TouchScreen equipped with a non-
infrared camera
Component replacement procedures 63