Led Indicators - Vizio SB3621n-H8 User Manual

LED INDICATORS

The LED Indicators will behave differently with each button on the remote control.
Function
Input
Bluetooth
Pairing
DTS
TruVolume
On/Off
Virtual:X
On/Off
English - 16
LED Behavior
(When searching for device)
Flash from the bottom to the
top and back continuously.
TruVolume On
TruVolume Off
Virtual:X On
Virtual:X Off
Press the INPUT button on the remote to cycle through the available inputs:
• Analog Audio In - AUX Stereo RCA
• Coaxial In - Digital
• Digital Optical Audio In - Optical
• Bluetooth
• USB In - USB
Press and hold the INPUT button on the remote control for 3 seconds to
enable the auto input detect function.
Press and hold the button on the remote. The sound bar will power down after
15 minutes if no device is found. You can now search for the sound bar (VIZIO
SB3621n) using your Bluetooth Device. The sound bar will power down if no
device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume
level for a more enjoyable listening experience.
Press the VRT:X button to enable/disable Virtual:X. When enabled (On), all
inputs will produce a virtual sound technology that simulates the effect of having
overhead sound. When disabled (Off), all sources will playback in stereo.
LED Indicators are located here.
Description