Led Indicators - Vizio SB3220n-F6 Quick Start Manual

LED INDICATORS

The LED Indicators will behave differently with each button on the remote control.
Function LED Behavior
Input
(When searching for device)
Bluetooth
Flash from the bottom to the
Pairing
top and back continuously.
TruVolume On
DTS
TruVolume
On/Off
TruVolume Off
English - 14
LED Indicators are located here.
Description
Press the INPUT button on the remote to cycle through the available inputs:
•Analog Audio In - AUX Stereo RCA (1)
•Analog Audio In - AUX Stereo 3.5mm (2)
•Coaxial In - Digital (3)
•Digital Optical Audio In - Optical (4)
•Bluetooth
•USB In - USB (6)
Press and hold the INPUT button on the remote control for 3 seconds to
enable the auto input detect function.
Press and hold the button on the remote. The Sound Bar will be discoverable
for 15 minutes. You can now search for the Sound Bar (VIZIO SB3220) using your
Bluetooth Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume
level for a more enjoyable listening experience.