Information from the heat pump
4
Information from the heat pump
The heat pump provides information about temperatures, operating
modes, possible alarms, etc.
4.1
Operating information
The Initial menu shows different temperatures and times of day.
Different operating symbols show the functions for which there are
demand or which are in operation.
Fig. 14
4.2
Info button
▶ Press
in the Initial menu.
Detailed information about temperatures, operating mode, etc., is
displayed.
▶ Turn the dial to see all the information.
▶ Press
to return to the initial.
▶ Press
in a menu display.
The detailed information is displayed for as long as
▶ Release
.
The menu display is displayed.
Fig. 15
6
4.3
Symbols for different functions and components for which there is a
need or which are in operation are displayed in the bottom right corner
of the Initial menu. The operating symbols displayed can vary depending
on the type of heat pump.
6 720 805 492-13.1I
is pressed.
6 720 807 583-11.1I
Fig. 16 Operating symbols
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10] Cooling (option)
[11] Sun (option)
[12] Shunted additional heat (option)
[13] External controls
[14] Program/Time control
[15] Party
[16] Holiday
[17] Screed drying
[18] Information log
Operating symbols
1
2
4
5
7
8
10
11
13
14
16
17
Compressor
Alarm (compressor, additional heat)
Heating
Electric additional heat
Energy supply cut-off
Hot water
Extra hot water
Hot water peak
Pool (option)
R1000 – 6 721 831 636 (2021/03) en
3
6
9
12
15
18
6 720 805 492-16.1I