Table of Contents
Advertisement
4
80
ATTENTION
z
Activation of the off-road
mode (Enduro and Enduro
Pro) when riding on-road.
Risk of crash due to lack of sta-
bility when the vehicle brakes or
accelerates in the control range
of ABS or ASC/DTC
Activate off-road mode (Enduro
and Enduro Pro) only for off-
road riding.
Repeatedly press button 1 until
the desired riding mode is dis-
played.
NOTICE
When selecting the ENDURO PRO
riding mode: bear in mind that
ABS control is deactivated for
the rear wheel.
The following ride modes can be
selected:
RAIN: For riding on a rain-wet
road surface.
ROAD: For riding on a dry road
surface.
with riding modes Pro
The following riding modes are
additionally available for selection:
DYNAMIC: For dynamic riding
on a dry road surface.
ENDURO: When riding off-road
with road tyres.
with riding modes Pro
When an encoding plug is in-
stalled, the ENDURO PRO and
DYNAMIC PRO riding modes re-
place the ENDURO and DYNAMIC
riding modes.
DYNAMIC PRO: For dynamic
riding on dry roadways while
taking into account the settings
made by the rider.
ENDURO PRO: For riding off
road with off-road tyres with
large tread blocks while taking
into account the settings made
by the rider.
With the motorcycle at a stand-
still, the selected mode is ac-
OE
tivated after approximately two
seconds.
The newly selected riding
mode is activated as you
ride only when the following
preconditions are satisfied:
Throttle grip is in idle position.
Brake is not applied.
OE
The set riding mode with the
relevant adjustments in engine
characteristics, ABS, ASC/DTC
and Dynamic ESA also remains
Advertisement
Table of Contents
