Table of Contents
Advertisement
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Tighten right axle clamping
screw 1 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Removing the front-wheel
stand.
Position left and right brake
calipers on the brake discs.
Install securing screws 4 on
left and right and tighten to
specified tightening torque.
Brake caliper on tele-
scopic fork
38 Nm
Remove the adhesive tape
from the wheel rim.
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to delayed
braking effect.
Before driving, check that the
brakes respond without delay.
Operate the brake several
times until the brake pads are
bedded.
Seat the cable for the wheel-
speed sensor in retaining
clips 1 and 2.
Insert the wheel-speed sensor
into the bore and install
screw 3.
Wheel-speed sensor to
fork leg
Joining compound: Micro-
encapsulated or medium-
strength thread-locking com-
pound
8 Nm
9
175
z
Advertisement
Table of Contents
