Table of Contents
Advertisement
2.4 – Safety guidelines while using the AG20
AG20 needles can be handled safely if a few basic precautions are taken:
Always wear personal protective equipment, in particular gloves, safety goggles
•
and ear protection
For the short-needle AG20 models (AG20-20 and AG20-50, 20mm and 50mm
•
respectively), the needle should always remain in the resting pad of the
equipment when:
-
-
-
For the long-needle AG20 models (AG20-100 to AG20-1000) it is necessary to
•
install a special resting cradle, designed according to the customer's structure.
Manual use of the long needles is not recommended due to the danger of
moving a long piercing object. In these applications it is highly recommended
that the needle be incorporated into an automated insertion system. See section
3.4 – Deep Measuring for details.
For storage, always keep the protective cap over the needle.
14
The equipment is not in use
Before starting the calibration process
Before using the needle cleaning function
M20-EPS User Guide
Advertisement
Table of Contents
