Timer Programming Using Vcr Plus+ System - Panasonic OmniVision PV-C1321-K Service Manual

Timer Programming using VCR Plus+
VCR Plus+ System is...
This feature allows you to set most items of a Timer Recording by simply entering a special
code number (PlusCode programming number) found in TV GUIDE and selected newspaper
TV listings.
Initial Setup...
In order to do Timer Programming using VCR Plus+, the Initial Setup (Clock and
Channels) on page 8 to 11 must be done.
Channel Setup...
Since PlusCode numbers assigned to channels (found in TV Guide and selected
newspapers) may differ from channels in your viewing area, you'll need to enter your
local TV channel number for each corresponding Guide Channel. Once Channel Setup
is done, the correct local channel will be selected when PlusCode numbers are used to
program this unit.
Channel Setup Preparations
To complete step 4 right, make
a local channel list (see
example below).
You will need the following:
• A normal TV and/or Cable
station line up and the channel
numbers you receive them on.
• A list of Guide (VCR Plus+)
channel numbers for stations you
receive (see TV Guide and
selected newspapers.)
1 Make a 3-column chart.
In the left column, write all station
names you receive.
2 In the middle column, write each
station's Guide (VCR Plus+)
number (see TV Guide, etc.).
3 In the right column, write the
channel number your TV
receives the station on.
< EXAMPLE ONLY >
Broadcast or
Assigned
Cable
Guide
Station Name
(VCR Plus+)
Channel no.
HBO
33
Nickelodeon 38
CBS
34
FOX 11
24
VCR Plus+ Channel Setup
[For DSS / Cable Box connection only.]
At first, do Channel Setup Preparations (left).
1
Press ACTION*
to display MAIN MENU.
2
SELECT :
SET
3
ANTENNA : CABLE
AUTO SET
CHANNEL CAPT I ON
WEAK S I GNAL D I SPLAY : OFF
CABLE BOX SET UP
VCR P l u s+ CH SET UP
SELECT :
SET
END
4
Channel no.
your TV
receives the
station on
15
To Make Corrections
20
Press
04
to error, then
change, or ADD/DLT to
erase number.
5
Press ACTION three times
to end the setup.
1)Press
M A I N MENU
T V VCR LANGUAGE 2)Press ACTION to
EX I T
C H CLOCK
: ACT I ON
1) Press
SET UP CHANNEL
2) Press
H SET UP
:
: ACT I ON
1)Press
VCR P l u s + CH SET UP
GU I DE CH RECE I VE CH
01 01 — —
02 — —
2)Press
VCR P l u s + CH SET UP
GU I DE CH RECE I VE CH
3)Press
SELECT :
SET :
END : ACT I ON
4)Press
and to move
• Repeat step 4 until list
to
®
System
to
select "CH."
display SET UP
CHANNEL screen.
to select
VCR Plus+ CH SET
UP.
to display
screen.
to scroll
up/down the GUIDE
CH column.
to move
cursor to right column.
to change
the CABLE CH
number.
to set VCR
Plus+ channels.
is complete.