Supplied Components; System Requirements - Sharp PN-80TC3 Operation Manual

If any components are missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Power cord
 Remote control unit battery
(R-6 ("AA" size)): 2
 Cable clamp: 3
 Cable clamp (insertion type): 4
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Computer
OS
CPU
Memory
Free space on hard drive
To use the touch panel, the touch panel and computer must be connected, and Touch Panel Settings Tool, Touch Pen Utility, and
Pen Software must be installed on the computer from the supplied CD-ROM.
When the Touch Display Downloader is installed, you can check and download the most recent versions of the software
programs. To install the software, see the manual for each.
The USB port varies depending on the terminal connected to the computer.
D-sub 1 input terminal/DisplayPort input terminal/HDMI 1 input terminal
D-sub 2 input terminal/HDMI 2 input terminal/HDMI 3 input terminal
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
Download the setup program for the Touch Viewing Software with the Touch Display Downloader.

Supplied Components

 CD-ROM (Utility Disk): 1
 CD-ROM (Touch Display Link): 1
 Touch Display Link License: 1
 Setup Manual: 1
 Touch pen (for capacitive touch panel)
(PN-ZL03): 2
 Touch pen adapter (PN-ZL01): 1
 Pen tip for touch pen
(for capacitive touch panel): 8
 Touch pen battery
(LR-03 ("AAA" size)): 2
 Tray: 1
 Speaker cover: 2

System Requirements

PC/AT compatible computer with a USB 2.0 port and able to output a resolution of 1920 x 1080.
(CD-ROM drive required for software installation.)
Windows 7 (32-bit or 64-bit version),
Windows 8 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),
Windows 10 (32-bit or 64-bit version)
Intel Celeron or AMD Sempron 1.6 GHz or faster
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
At least 2 GB
At least 200 MB (free space separately required for data storage)
 USB cable: 1
 RS-232C conversion cable (3.5mm mini jack): 1
 Eraser (for capacitive touch panel): 1
 Camera mount: 1
 Camera screw (inch thread): 1
 Touch pen adapter screw (Step screw, M3): 1
 Speaker cover attachment screws (M3)/
Camera mount screws (M3): 6
 Vertical sticker (Logo): 1
 ID labels (for touch pen): 4 x 2
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover
the logo.
USB 1 port
USB 2 port
9
E