Yamaha XMAX Owner's Manual page 25

The temperature displayed may vary
from the ambient temperature. Push-
ing the "INFO" button switches the
ambient temperature display to the
battery voltage, the average fuel con-
sumption, the instantaneous fuel con-
sumption and average speed modes.
Battery voltage level display
ZAUM1109
This display shows the battery voltage
from 10.1 Volt to 17.9 Volt in 0.1 V in-
crements.
The voltage displayed may vary from
the battery voltage. Pushing the "IN-
FO" button switches the ambient tem-
perature display to the battery voltage,
the average fuel consumption, the in-
stantaneous fuel consumption and av-
erage speed modes.
TIP
If the battery warning indicator "
flash and warning message indicate "H
BATT" or "L BATT", have a Yamaha
dealer check the battery.
Instrument and control functions
Average fuel consumption mode
The average fuel consumption display
can be set to either "Ave/Cons_ _._
km/L" or "Ave/Cons_ _._ L/100 km"
(except for the UK).
For the UK only:
The average fuel consumption is dis-
played "Ave/Cons_ _._ MPG".
This display shows the average fuel
consumption since it was last reset.
"
To reset the average fuel consumption
display, select it by pushing the "INFO"
button, and then push and hold the
"INFO" button for 3 seconds.
3-11
ZAUM1110
 When the display is set to
"Ave/Cons_ _._ km/L", the aver-
age distance that can be traveled
on 1.0 L of fuel is shown.
 When the display is set to
"Ave/Cons_ _._ L/100 km", the av-
erage amount of fuel necessary to
travel 100 km is shown.
 For the UK only: When the display
is set to "Ave/Cons_ _._ MPG",
the average distance that can be
traveled on 1.0 Imp.gal of fuel is
shown.
3