Sharp AR-285 Service Manual page 100

AR-505
Enter the code number with the 10-key pad and press the [OK]
key.
∗
Detection size when 8.5" x 13" document/paper is used
Unit
Document AR-SP1 All
destinations
AR-AF1 Japan
AR-RF1
EX AB
series
(SLK/SEEG)
EX AB
series
(SCA/
Others)
Inch series
(SEC/SECL)
Inch series
(Others)
Document Japan/EX
table AB series
Inch series
Paper Main Manual All
body feed destinations
tray
Paper All
feed destinations
cassette
AR-DE1/DE2 All
destinations
AR-LC1 All
destinations
*1: A document of 8.5" x 14" is detected as 8.5" x 13".
*2: A document of B4 is detected as 8.5" x 13".
*3: A document of A4R is detected as 8.5" x 13".
*4: A document of 8.5" x 14" is detected as 8.5" x 13".
*5: Applicable by replacing the document set tray of the AR-
AF1/RF1.
*6: Setting is available with the key operator program (P40).
Value Display
1 Characters HEAVY PAPER
2 Weight in g. 106 - 200 g/m
3 Weight in lbs. 28+ - 55 lbs
26 - 3
Purpose Setting
Function Used to set the specifications of the auditor. Setting
(Purpose) must be made depending on the use condition of the
auditor.
Section Auditor
Item Specifications
Operation/ Enter the code number corresponding to the auditor
Procedure specification mode with the 10-key pad and press the
[OK] key.
10/8/1999
Set value
0
Destination
1 (Valid)
(Default)
(Invalid)
8.5" x 14" 8.5" x 13" *1
A4R A4R
A4R A4R
A4R 8.5" x 13" *3
8.5" x 14" 8.5" x 14" *5
8.5" x 14" 8.5" x 13" *1
B4 8.5" x 13" *2
8.5" x 14" 8.5" x 13" *1
8.5" x 14" 8.5" x 13" *4
—
—
Paper
PLAIN PAPER
2 2
56 - 105 g/m
15 - 28 lbs
Set value
1
2
3
*5
*5
26 - 5
Purpose Setting
Function Used to set the count mode of the total counter and the
(Purpose) maintenance counter.
Item Specifications
Operation/ Used to set the single count-up or double count-up for
Procedure the total counter, the maintenance counter, and the de-
veloper counter when printing is performed with A3, 11
x 17" paper,
1. Select the kind of the counter with [↑] and [↓] key.
A
B
*6
C
2. Enter "1" or "2" with the 10-key pad and press the [OK] key.
1: Single count
2: Double count
Default: 2
26 - 6
Purpose Setting
Function Used to set the specifications depending on the desti-
(Purpose) nation.
Item Specifications the
destination
Operation/ Select the destination referring to the table below.
Procedure
U.S.A.
Canada
Inch
Japan
AB_B
Europe
U.K.
Aus.
AB_A
When the destination setting is changed, the following specifica-
tion is changed.
(Toner save mode setup specification) (Paper specification)
7 – 24
Specification mode
Built-in auditor mode (Default)
Coin vendor
Others
Counter
Total
Maintenance
Developer
Destination
United States of America
Canada
Inch series, other destinations
Japan
AB series (B5 detection) other destinations
Europe
United Kingdom
Austrailia
AB series (A5 detection) other destinations