Table of Contents
Advertisement
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the
button twice.
0
3.
Use the
or
button to set the cooking time.
@
A
4.
Press the
0
button.
5.
The
arrow is next to
N
y
ready is displayed.
Use the
@
or
A
button to set a later end time.
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The display shows the time at which the
dish will be ready and the
The
and
symbols go out. When the oven starts, the
V
0
cooking time counts down in the display and the
next to the
symbol. The
x
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
button. You can set a new cooking time
0
using the
or
button. Or press the
@
A
the function selector to the off position. The oven switches off.
Childproof lock
The oven has a childproof lock to prevent children from
switching it on by accident.
The oven will not respond to any settings.You can still set the
clock and the timer when the childproof lock is activated.
If the type of heating and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Note: If a hob is connected, it will not be affected by the
childproof lock on the oven.
Activating the childproof lock
No cooking time or end time should be set.
Press and hold the
button for approx. four seconds.
h
The
symbol appears in the display. The childproof lock is
@
activated.
. The time when the dish will be
arrow is next to the
symbol.
N
y
arrow is
N
symbol goes out.
y
button twice and turn
0
Changing the end time
Use the
or
button to change the end time. After a few
@
A
seconds, the change is adopted. If the timer has been set, first
press the
button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
button to reset the end time to the current time. After
A
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After connecting the appliance to the mains or after a power
cut, the
symbol and three zeros flash in the display. Set the
0
clock.
Press the
button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the
N
arrow is next to
Use the
or
button to set the clock.
@
A
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
button four times.
0
1.
The time symbols light up in the display and the
next to
.
0
Use the
@
or
A
button to change the clock.
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Deactivating the childproof lock
Press and hold the
button for approx. four seconds.
h
The
symbol goes out in the display. The childproof lock is
@
deactivated.
button twice.
0
arrow.
N
cooking time,
end time or
y
arrow is next
N
0
.
N
arrow is
0
11
Advertisement
Table of Contents
