Sony VAIO PCG-SRX87 Quick Start Manual page 45

Spitfire_QS.book Page 45 Wednesday, April 24, 2002 10:48 AM
1 Press the Windows® key and use the arrow keys to select All Programs, and
then Sony Notebook Setup.
2 Select the Touchpad tab using the arrow keys.
3 Select Enable Touchpad, either by pressing the Tab key or the Alt+"E" keys,
and then press Enter.
You must restart the notebook to make the touchpad work again.
If your touchpad is interpreting a single tap as a double-click, you must adjust the
button assignments. Follow these steps:
1 Press the Windows key and use the arrow keys to select Control Panel. The
Control Panel dialog box appears.
2 Press the Tab key until Printers and Other Hardware is highlighted, then
press Enter. The Printers and Other Hardware dialog box appears.
3 Press the Tab key again, until Mouse is highlighted, then press Enter. The
Mouse Properties dialog box appears.
4 Change the button assignments in the Mouse Properties dialog box, using the
Tab key and arrow keys. (One of the buttons is assigned to the double-click
action.) Press Enter.
If this procedure does not work, ensure that another mouse was not installed. You
may need to use your supplied Driver Recovery CD(s) to reinstall the mouse
drivers. See "Using the Recovery CDs" on page 33 for more information.
The pointer does not move while I am using the Touchpad or
Mouse.
The computer should be restarted. Follow these steps:
❑
1 Press the Windows key.
2 Press the "U" key to select Turn Off Computer / Shut Down, and wait at
least four seconds.
3 Press the "R" key to restart your computer.
❑ If you cannot restart your notebook as described in the step above, press
Ctrl+Alt+Delete simultaneously to display Windows Task Manager, press
Alt+"U" to display the Shut Down menu, and press "R" to restart the
computer.
Troubleshooting
45