Symbols - Kobalt KST 4040X-06 Operator's Manual

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS DESIGNATION
V Volts
A Amperes
Hz Hertz
W Watts
No Load Speed
Alternating Current
/min Per Minute
Direct Current
Safety Alert
Read The Operator's Manual
Eye Protection
Wet Conditions Alert
No Blade
Ricochet
Keep Bystanders Away
EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Rotational speed, at no load
Type of current
Revolutions, strokes, surface speed, orbits, etc., per
minute
Type or a characteristic of current
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
Do not install or use any type of blade on a
product displaying this symbol.
Thrown objects can ricochet and result in
personal injury or property damage.
Keep all bystanders at least 50 ft. away.
5