Stopping The Machine - Toro 74915 Operator's Manual

Using the Motion Control Levers
Figure 23
1. Motion control
lever-neutral lock position
2. Center, unlocked position
3. Forward
Driving Forward
Note: The engine will kill if the traction control levers are
moved with the parking brake engaged.
To stop, pull the motion control levers to the neutral position.
1. Release the parking brake; refer to Releasing the
Parking Brake in Operation.
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion control levers
forward (Figure 24).
4. Backward
5. Front of machine
Driving Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control levers
rearward (Figure 25).

Stopping the Machine

To stop the machine, move the traction control levers to
neutral and move to locked position, disengage the power
21
Figure 24
G008953
Figure 25
G008952