The picture is not bright, or the picture colours do not look clear
If the screen appears too dim, try changing the settings under
Energy Saving
Solution.
•
Menu
•
Menu
Optimisation
Try Now
•
Menu
Solution
Try Now
Go to
Picture
and adjust the
•
Menu
•
Menu
•
Menu
•
Menu
•
Menu
•
Menu
The picture colours are black and white or do not look the way they should
look
If the product's colours or absolute whites/blacks seem to be off, launch
•
Menu
If the test results indicate that the problem is not caused by the TV, do the following:
When using the One Connect Box, confirm that its video input connectors are connected to the correct external
device video output connectors.
If using a component cable, ensure that the green (Y), blue (Pb), and red (Pr) cables are connected properly.
Incorrect connections may cause colour problems or a blank screen.
Component port may not be supported depending on the model.
Check whether
Greyscale
•
Menu
Settings
All Settings
Settings
All Settings
Settings
All Settings
Picture
Mode, Contrast, Brightness, and
Settings
All Settings
Settings
All Settings
Settings
All Settings
Settings
All Settings
Settings
All Settings
Settings
All Settings
Settings
Support
Device Care
is set to On.
Settings
All Settings
Reset Picture
Picture
Expert Settings
General & Privacy
Power and Energy Saving
General & Privacy
Power and Energy Saving
Sharpness
Picture
Picture Mode
Picture
Expert Settings
Picture
Expert Settings
Picture
Expert Settings
Picture
Expert Settings
Picture
Expert Settings
Self Diagnosis
General & Privacy
Accessibility
- 203 -
or disabling
Brightness
Reset Picture
Try Now
settings.
Try Now
Contrast
Try Now
Brightness
Try Now
Sharpness
Try Now
Colour
Try Now
Tint (G/R)
Try Now
Picture
Test.
Picture Test
Try Now
Greyscale
Optimisation,
Brightness
Energy Saving
Try Now