Start-Up Procedure - Ice-O-Matic CIM0520FA Installation Manual And Owner's Manual

Cube ice maker, 300 lb through 2000 lb cubers

Hide thumbs Also See for CIM0520FA:

Installation manual and owner's manual (18 pages)

Table Of Contents

Table of Contents

ELEVATION SERIES

Note: Before starting the machine, make sure the

machine is level within 1/8 inch in all directions, the

bin or dispenser leg height can be adjusted by

rotating the leg foot

After verifying proper voltage, water supply,

drains and breathable air space around the unit,

press and quickly release the ON/OFF button

behind the unit front panel. The indicator light will

change from a solid red to solid blue in color.

Follow the sequence of operation described under

"Operation of CIM Series Cuber" in this manual.

Check operation of each component through the

cycle as explained in this section.

Bridge Thickness Adjustment

Once the unit has gone through a harvest cycle,

verify the bridge thickness (3/16" thick for units

less than 400 lbs. and 1/8" for 400 lbs. and above)

across the middle of the ice slab on the second

batch produced. The ice thickness can be changed

on the Float Housing by turning the adjustment

clockwise to decrease the bridge thickness and

counter-clockwise to increase the bridge thickness.

You will hear a "click" with each adjustment. It is

recommended adjustments be made one or two

"clicks" at a time.

Model

CIM0320/0330

CIM0430/0520/0530/0630

CIM0820/0830/1120/1130

CIM1440/1540/1840/2040