Table of Contents
Advertisement
18
O
PERATION
STARTING COLD ENGINE
WARNING
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1.
Stop Switch - Start/Run.
Move stop switch button (A) forward away from the STOP
position.
2.
Close Choke - Cold Start.
Move choke lever (B) to Cold Start Position.
3.
Primer - Pump Bulb.
Pump primer bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
4.
Start - Pull Rope.
Lay the trimmer on a flat clear area and pull the recoil starter handle
(D) until engine fires (5 or 6 pulls).
5.
Open Choke - Run.
Move the choke lever to the OPEN - RUN position. Restart engine
if necessary and allow to warm up running at idle for several
minutes.
DANGER
A
B
C
D
Advertisement
Table of Contents
