Advertisement
Quick Links
WWW.WILLIAMS-REFRIGERATION.COM
OPERATING MANUAL FOR MEAT AGEING REFRIGERATOR
IMPORTANT INFORMATION (PLEASE RETAIN THIS DOCUMENT)
This Manual covers the installation, operation and routine maintenance requirements for the
following Williams Refrigeration products:
MAR1
Please read this Manual carefully before connecting the appliance.
Provided the instructions in this Operating Manual are read and implemented correctly, the
optimum performance and reliability of your equipment should be maintained.
We assume the installer, user and service provider are appropriately trained, skilled and
competent to properly and safely carry out the work, and will use the necessary safety
equipment, and take the necessary precautions required of their intended work.
Improper installation, maintenance or repair may put the user at considerable risk.
Williams cabinets are available in a choice of temperature ranges and specific ambient ratings.
Temperature parameters are set as follows:
Meat Ageing (MA)
General Regulations
Declaration of Conformity:
Refrigerant Designation
HC - R290
Williams Refrigeration declares that all products manufactured by Williams Refrigeration comply with the
above directives as they apply to those products, and those products are therefore declared to be in
conformity with the provisions of the above legislation.
Model No.: ...............................................................................
Serial No.: ................................................................................
+1°C (34°F) / +6°C (43°F)
Global Warming Potential
3
Ambient Climate Class
5
Advertisement
Related Manuals for Williams MAR1
Summary of Contents for Williams MAR1
- Page 1 Improper installation, maintenance or repair may put the user at considerable risk. Williams cabinets are available in a choice of temperature ranges and specific ambient ratings. Temperature parameters are set as follows: Meat Ageing (MA) +1°C (34°F) / +6°C (43°F)
- Page 2 DO NOT remove the plug from the socket as this could act as a source of ignition. Leaking refrigerant may ignite and cause injuries. Keep ventilation openings in the appliance enclosure or in the structure clear of obstruction. Contact Williams Refrigeration on +44 (0) 1553 817 000, stating the suspected fault.
-
Page 3: Important Safety Information
30mA. If the supply cord is damaged, it must be replaced by a service engineer or other qualified person. Only the supply cord supplied by Williams Refrigeration must be used. Fixed wiring appliances (those not supplied with a plug) shall incorporate a switch disconnector to meet the specification of IEC 60947;... -
Page 4: Installation
Care should be entanglement. If a plug or mains cable requires taken to ensure that no adhesive residue remains replacement, contact the Williams Spares Office on on the surface. Any stubborn or tough adhesive +44(0)1553 817017. - Page 5 INSTALLATION / CONTROLLER LOADING / SHELF DISTRIBUTION off and safe isolation purposes. The switch disconnector must meet the specification Before loading, allow the appliance to reach its requirements of IEC 60947 normal operating temperature. When loading the appliance, please ensure that its If the appliance has been laid on its back load is equally distributed throughout and ensure air or tipped, DO NOT switch on immediately.
- Page 6 The humidity display indicates the cabinet’s internal relative humidity. Should a probe failure occur please contact Williams Refrigeration Spares Office on +44 (0) 1553 817000 for a replacement part stating the unit’s serial number.
- Page 7 APPLIANCE ROUTINE MAINTENANCE / CLEANING APPLIANCE ROUTINE MAINTENANCE / CLEANING ROUTINE MAINTENANCE For tougher spots, creamy polishes like CIF original Safely disconnect the appliance from the cream can be effective. Light pressure should be power supply before cleaning, servicing or used when cleaning with the grain.
- Page 8 Service Provider. gasket. Damaged gaskets do not seal correctly and can increase the amount of electricity consumed, In the event of a breakdown, please contact Williams seriously affecting the efficiency and performance of Refrigeration or your Service Provider the appliance.
- Page 9 Shut door CHOOSING GENUINE SPARE PARTS Choosing the correct spare parts is vital to the ongoing running of your appliance - that’s why Williams Refrigeration offer a comprehensive network of servicing, support and spare parts all available directly from Williams.
- Page 10 We offer a 24 months Warranty from our original with the product in its position of operation or in a date of sale with the following Williams equipment: suitable location on the customer’s premises. If the product has to be removed for security or any other 1.
- Page 11 Should you require Extended Warranty, state on your order or notify the Dealer or Williams Sales 7. Equipment manufactured to the customers’ own Manager at the time of purchase and they will be design, Williams Refrigeration will not be liable able to arrange it for you.
- Page 12 Fax: +852 2407 3767 www.williams-refrigeration.com.au sales@williams-hongkong.com www.williams-refrigeration.com.hk www.williams-refrigeration.com Williams Refrigeration is a trading name of AFE Group Limited. Registered in England & Wales under Registered Number 3872673. Registered Office Address - Bryggen Road, North Lynn Industrial Estate, King’s Lynn, Norfolk, PE30 2HZ 0604_OP_MAR1...